Nau'in kayan ajiyar motoci da aka sanya

Ⅱ. Bambance-bambance tsakanin babba {{{1} {} octage da ƙananan- operage busings

Pad - {} ireformers da aka sanya wa transformers da yawa a cikin tsarin rarraba, musamman a cikin biranen birni, musamman a cikin biranen birni da mazaunin aminci da kayan ado suna da mahimmanci. Dababba {{0} enpagedalow {{0} enption} octage bushona kan pad - + transformassi ya bambanta sosai a cikin sharuddanMatakan Voltage, ƙarfin halin yanzu, bukatun rufi, ƙirar tsari, da hanyoyin haɗin haɗin, da hanyoyin haɗin haɗin, da hanyoyin haɗin ciki.

Da ke ƙasa akwai mahimman bambance-bambance:

 

2.1 sigogi na lantarki

Siffa	Babba {{0} actrage	Low {{0} ~} octage
Rated wutar lantarki	Babban voltage (misali, 12kv, 24kv, 35kv)	Low voltage (misali, 400v, 415v, 600v)
Rated na yanzu	Low low na yanzu (dubun ga ɗaruruwan amperes)	In mun gwada da babban halin yanzu (daruruwan zuwa dubban amperes)

 

2.2 Designirƙirar Tsarin Tsarin Kashi na 2.2

Babba {{0} enpage:

• Na bukatar mafi girmaIkon Jiki.
• Tsara tare danesa mai tsayidaBabban Juriya.
• Sau da yawa amfaniInterface - Masu haɗin nau'in(Misali, shekara-shekara zuwa kisan 400a kisan 400a.

Low {{0} enption} octage bushon:

• Owallon ƙasan rufin lalacewa saboda ƙananan ƙarfin lantarki.
• Jadadana yanzu -} Aikidazafi wargisaboda babban kaya na yanzu.
• Yawancin lokaci fasalinarmon {{0} 0 0} ko ingarma - termin terminals, jituwa tare da manyan Cross - und Tashi ko masu gudanar da aluminium.

 

2.3. Heat Hissipation da Haɗin lantarki

• Dababba {{0} gefen agogoHaɗa zuwa layin sama ko igiyoyin ƙasa, yana ɗaukar ƙasa a halin yanzu, kuma yana haifar da ƙarancin zafi.
• Dalow {{0} gefen agogoMashin End {{0- Ladaya mai amfani tare da mafi girman halin yanzu, don haka an tsara bushewa tare da manyan hanyoyin sadarwa don rage zafin rana.

 

2.4. Kiyayewa da dubawa

• Babba {{0} enctage} octage bushon da ke mayar da hankali kanFitar Sakin (PD), babinsu, da kuma rufe bakin ciki.
• Low - ire -}age busterings ana bincika suTuntuɓi juriya, overheating, daTabbatacciyar amincin.

 

Ⅲ. Rarrabuwa mai sarrafawa

3.1 Dangane da yanayin aiki, ana iya rarrabe su azaman masu haɗin ba da izini da masu haɗin kai.

a) Mai haɗa Haɗin Aiki

• Mai haɗa haɗarin hutu shine nau'in haɗi da aka tsara don haɗin haɗin ko haɗi a ƙarƙashin nauyin. Yana fasalta wani kayan aiki na baka a ciki, yana ba da amintaccen aiki a ƙarƙashin yanayin sauke.
• Tare da na'urorin kawar da baka a ciki, yana ba da damar buɗe da rufe ayyukan da ke ƙarƙashin kaya.
• Yana ba da ingantaccen sassauƙa, bada izinin kiyayewa da sauya a ƙarƙashin yanayin aiki na yau da kullun.
• Ya dace don aikace-aikace da ke buƙatar cire haɗin sau da yawa da haɗi, kamar ayyukan gudanarwa da ayyukan gyara da kuma gyara ayyukan sadarwar.

b) Mai haɗawa

• Mai haɗa haɗin haɗi na matattu shine nau'in haɗin haɗin da ba za a iya cire shi ba ko kuma an haɗa shi a ƙarƙashin nauyin. Ana iya sarrafa shi kawai lokacin da tsarin yake kashe (watau, a cikin wani - ourity jihar).
• Tsarin sa yana da sauki kuma yawanci ya dace don aikace-aikacen da ba sa buƙatar cire haɗin akai-akai da haɗi.
• Tana da babban aminci saboda ana sarrafa shi ba tare da kaya ba, rage hadarin ArC tsara.
• Rayuwarta ta sabis ɗin ba ta daɗe ba, amma sassauci ya zama ƙasa da ƙasa.

 

3.2 Ana iya rarraba shi ta hanyar ƙarfin lantarki kamar 15kv, 25KV, 28KV da 35KV.

Matakin wutar lantarki na mai haɗawa

Matakin wutar lantarki na mai haɗawa

 

3.3 Ana iya rarraba shi ta hanyar kimantawa a halin yanzu 200a, 600A, da 900A.

Matsayin yanzu na mai haɗawa

Rarraba na yanzu na mai haɗawa

 

3.4 A gwargwadon siffarsu da aikinsu, ana iya rarrabe su a matsayin masu haɗin gwiwar hannu, masu haɗin kai tsaye, masu haɗin tee kuma saka masu haɗi.

Mai haɗa Haɗin Elbiye:

• An tsara shi a cikin l - Fifface ko T {1}- ire-irence kuma ana amfani da sifa a kayan rarraba wutar lantarki, musamman a yankuna tare da iyakance sarari.
• Aikaceos aikace-aikace: Ana yawanci amfani da shi don haɗa sosai {0} ire} Blonage na lantarki tare da transformers ko sauke kabad.

HUKUNCIN HAKA:

• Yana da tsari madaidaiciya kuma galibi ana amfani dashi a cikin yanayi suna buƙatar madaidaiciya madaidaiciya.
• Abubuwan aikace-aikacen aikace-aikacen: Ana amfani dashi don haɗin haɗi tsakanin igiyoyi da kayan aiki.

Haɗin Tee:

• Yana ba da damar don Multi - onation onptions a cikin na USB Layin kuma ana amfani da shi don reshe fitar da reshe na reshe daga babban layi.
• Aikaceos Aikace-aikace: A cikin hanyoyin sadarwar ƙarfin wuta, ya dace da rarraba yanayin yanzu daga babban layin kebul.

Saka Conte:

• An tsara shi da za a saka shi da kyau kuma ana amfani dashi a cikin haɗin tare da sauran kayan haɗin mai (kamar ƙwayoyin cuta).
• Dokar Aikace-aikace: Ana amfani dashi sosai a cikin Wells Hannun Sleeve na Babban {{0} kayan aiki.

 

3.5 Dangane da tsarin kariya Aikin, akwai mai haɗin mai ta orrester.

• Haɗin Arrester: Wannan mai haɗa yana haɗa aikin Arrering mai walƙiya kuma ana amfani dashi don kare kayan lantarki daga yajin wasan walƙiya ko lalacewar walƙiya ko lalacewa.
• Misali: gwiwar hannu ta Arrester da tee arrester

 

Ⅳ.200 amP pad ya sanya bayanan buɗaɗɗen

 

{{04.7 200} idbreak mai amfani da haɗi mai haɗi

 

4.8 200} ute-wani lokacin kisan kai tsaye

 

 

{{0} }/1} / 900 amp pad

5.1 Connect mai haɗi

Ma'anar:

• Mai haɗawa mai haɗi na tee shine "t" {0} {{accefactor, wanda ake amfani da shi don reshe haɗin kebul na kebul daga layin kebul.

Dalili:

• Bayar da haɗin reshe daga babban layin zuwa nauyin ko wasu kayan aiki.
• Dalilin fasalin wannan mai haɗawa shine samar da batun haɗin haɗin reshe ba tare da katse ikon samar da wutar ba.
• Ana amfani dashi cikin hanyoyin sadarwar wutar lantarki, inda ya zama dole don haɗa ko cire haɗin wani reshe ba tare da katse babban wutar lantarki ba.

 

Kulawa na 5.2

Ma'anar:

• Haɗin TEE shine daidaitaccen "T"} {{. {- {} {} {{}} {{}} {} {} {{} {{} {- siffofin haɗin yanar gizo.

Amfani:

• Yana haɗu da igiyoyi uku tare, yana ba da damar yanzu ta gudana cikin hanyoyi uku.
• Ana amfani da shi musamman don haɗa sassa daban-daban na tsarin wutar lantarki don tabbatar da ci gaba tsakanin kayan lantarki.
• Ana amfani dashi cikin yanayi inda ake buƙatar jujjuya iko daga babban layin zuwa wasu hanyoyin biyu.

 

5.3 Raukar Matsa Matsa

Ma'anar:

• Na'urar kayan aiki da aka tsara don canza 600 - ired ko 900} Nazar-karya ne matacce {5} {{ERDEMET MUTUM 200

Bayanin:

• A rage matsa buga shine adafara - ire na na'urar da ke ba da canji ko haɗi tsakanin tsarin tare da igiyoyi dabam dabam. A cikin aikace-aikacen aikace-aikace:
• Zai iya haɗa tsarin tare da ƙimar kimantawa na yanzu (kamar su 600A ko 900A ko kuma a cikin matakai na yanzu (kamar su ya mutu ko ɗaukar nauyi).
• Ana amfani da wannan na'urar a cikin tsarin tsarin wutar lantarki ko juyawa don tabbatar da daidaituwa tsakanin na'urori daban-daban da abubuwan haɗin.

Yanayin Aikaceos:

• Amfani da lokacin da na'urori masu haɗi tare da nau'ikan kimantawa na yanzu ana buƙatar su, alal misali, juyawa daga ƙarami {{0 {1} na yanzu {2} {10} na yanzu {{2} na yanzu.
• Yana ba da sassauci, bada izinin abubuwan da aka haɗa a cikin tsarin ikon da za a haɗa su ba tare da iyakancewarsu ba.
• Ta amfani da saukar da rage buga hard, m juyawa da daidaituwa tsakanin daban-daban kayan aiki za a iya cimma, tabbatar da amintaccen aiki na tsarin.

 

5.4 Haɗa bidiyo

Ma'anar:

• Mai haɗawa wanda ke ba da bututun bututu guda biyu.

Bayanin:

• Fitilar haɗin haɗin na'urar haɗi ne da aka tsara don haɗa musayar bututun ruwa biyu, ana yawanci amfani da su a cikin tsarin lantarki don haɗa na'urori biyu zuwa madaidaiciya.
• Dakin sa yana ba da haɗin haɗin da aka dogara da shi tsakanin tubleel na layi daya, tabbatar da amintaccen watsa na yanzu tsakanin na'urorin.

Yanayin Aikaceos:

• Za'a iya amfani da toshe haɗin haɗi a cikin babban {{0} Kayan aikin lantarki, musamman a cikin yanayi guda biyu na buƙatar haɓaka na'urorin lantarki guda biyu.

Takaitawa:

• Filuti mai haɗi shine mahimmin aikin don haɗawa da musayar bututu guda biyu, tabbatar da lafiya da kuma watsa lafiya a cikin tsarin lantarki.

 

5.5 Insulated toshe

Ma'anar:

• Na'urar kayan aiki da aka tsara don rufin lantarki, garkuwa da wutar lantarki, da kuma hatimin ƙirar Elbow-} inter 0.

Bayanin:

• Plusicked toshe shine na'urar da ake amfani da ita don rufe da kare gwiwar gwiwar hannu 0}}}}}}}}}}}}}}}}}}} ire-irken lantarki, tabbatar da rufin wutar lantarki a cikin hanyar haɗin.
• Hakanan yana da aikin zaton na inji don hana rinjasasshen yanayin waje (kamar danshi ko ƙura) a gwiwar hannu) akan gwiwar hannu) akan gwiwar hannu) akan gwiwar hannu) akan gwiwar hannu) akan gwiwar hannu) akan gwiwar hannu) akan gwiwar hannu) a kan gwiwar hannu 0}}} inter 0 0}} 0 0 0} 0 0 0

Yanayin Aikaceos:

• Ana amfani da toshe wanda aka saba amfani dashi a gwiwar hannu {{0} Masu haɗin rubutu a cikin tsarin wutar lantarki. Lokacin da gwiwar hannu -}} entit mai haɗi ba a amfani da ɗan lokaci, yana samar da rufin lafiya, tabbatar da amincin tsarin.

Takaitawa:

• Inspeed toshe shine na'urar kariya don gwiwar gwiwar gwiwar hannu -} type type head head,,,, gami da rufin lantarki, garkuwa, da kuma hatimin wutar lantarki.

 

Vi. Tsarin aiki na gama gari

6.1 na yau da kullun 1

6.2 hali sanyi karo na 2

6.3 Hammali Kanfigareshan 3 6

6.4 Tsarin aiki na al'ada 4

6.5 daidaitawa na yau da kullun 5

6.6 na yau da kullun

6.7 Halittar sanyi 7

6.8

 

Vii. Iri na Pad wanda aka sanya sextory / lv daji bushings

Pad da aka sanya mai sauyawa speforer spade

CSA C227.4: 21

Mai watsa shirye-shirye, KVA	Da darajar wutar lantarki na mai canzawa
	600Y/347	480Y/277	208Y/120
75-300	4 ramuka	4 ramuka	4 ramuka
500-1000	4 ramuka	4 ramuka	8 ramuka
1500-2000	6 ramuka	8 ramuka	Ba wani zaɓi da aka fi so ba
2500-3000	8 ramuka	8 ramuka	Ba wani zaɓi da aka fi so ba

 

Ieee STD C57.12.34-2022

Low {{0} darajan ƙwallon lantarki			Mafi qarancin ramuka
208Y/120	240	480Y/277, 480 600Y/375 600
45-300kva	45-500kva	45-500kva	4 ramuka
500kva	750kva	750-15kva	6 ramuka
750-1000Kva	1000kva	2000-3750kva	10 ramuka

 

Low {{0} {0} Blonage ne na zane

 

 

Nailan Bushing

Abu:

• An yi shi da karfi- togarfin elon, yawanci jin wutar lantarki {1} {1 {} {1 {1 {{{{{{{{{1}

Abvantbuwan amfãni:

• Haske mai sauƙi da sauƙi don kafawa;
• Kudin {{0 0 0-} Inganci;
• Or {{0} irprentant, dace da gumi ko bakin teku;
• Kyakkyawan juriya.

Rashin daidaituwa:

• Karfin motsi na yau da kullun idan aka kwatanta da ƙarfe daji;
• Limitar da hancin Haske mai tsufa na fuskantar lullube - {(Hight High - Laifi na Locaku.
• Nylon bushings are generally used in pad mounted transformers with smaller capacities (eg,<=300 kVA), or in applications where cost efficiency and corrosion resistance are prioritized.